Home All Products GeZu AngleFit 90° Corner Bracket 60 / 80 / 100 mm | Steel L Bracket Bundle
GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions

Ships within 24hrs

In demand Sold 10+ product in last 24hr

GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions
Product Information

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Technical Details

MM CM IN
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

GeZu AngleFit 90° Corner Bracket 60 / 80 / 100 mm | Steel L Bracket Bundle

SKU: DUMMY-GZ-AF-060-GAL-4
150,58 krInc VAT Sale price

The AngleFit 90 degree corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and finish.

  • Packs of 4, 6, 8 or 12
  • 3 mm steel in every size
  • Eight 6 mm holes, four per leg
  • Galvanised silver or matt black
Pack size: Set of 4
Pack size :
Size: 60 × 60 × 40 mm
Size :
Finish: Galvanised Silver
Finish :
Add to Wishlist Add to Compare
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Notify me if back in stock

Enter your email address to be notified if the product becomes available again.

Unlock Bigger Savings

Discount automatically applied at checkout.
Buy 4+
143,05 kr
Incl. VAT
Save 5%
Buy 8+
135,52 kr
Incl. VAT
Save 10%
Buy 12+
127,99 kr
Incl. VAT
Save 15%
Buy 16+
120,46 kr
Incl. VAT
Save 20%

Technical Details

MM CM IN
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Frequently asked questions!

Explore the most frequently asked questions to help you get the best experience.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Yes. We offer fast, reliable shipping across most European countries. Shipping options and delivery times are shown during checkout.

To ensure you're choosing the right product, review the detailed descriptions and specifications on each product page, and feel free to reach out to our customer support team for personalized guidance. We're here to help you make the best choice for your project needs!

You can reach us via email at support@gezu-impex.nl, through our contact form. We're available from Mon-Fri.

We offer a 30-day return policy for unused items in their original packaging. Please contact our customer service team to initiate a return.

We accept all major credit cards (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay, and bank transfers for larger orders.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Icon