Strona główna Wszystkie produkty Kotwa Regulowana do Słupa Drewnianego U 71 / 91 / 101 mm | Podstawa Słupa Przykręcana
Height adjustable U post support - 71 mm galvanised silver - Gezu Impex
Height adjustable U post support - 71 mm matt black - Gezu Impex
Height adjustable U post support - 91 mm galvanised silver - Gezu Impex
Height adjustable U post support - 91 mm matt black - Gezu Impex
Height adjustable U post support - 101 mm galvanised silver - Gezu Impex
Height adjustable U post support - 101 mm matt black - Gezu Impex
Height adjustable U post support in use - galvanised silver holding a pergola post on a concrete patio - Gezu Impex
Height adjustable U post support in use - four galvanised supports under a carport frame on a driveway - Gezu Impex
Height adjustable U post support - levelling the post with a spanner on the M20 spindle - Gezu Impex
Height adjustable U post support in use - matt black holding a veranda post on composite decking - Gezu Impex

Wysyłka w ciągu 24 godz.

Duże zainteresowanie Sprzedano 10+ produktów w ciągu ostatnich 24 godz.

Height adjustable U post support - 71 mm galvanised silver - Gezu Impex
Height adjustable U post support - 71 mm matt black - Gezu Impex
Height adjustable U post support - 91 mm galvanised silver - Gezu Impex
Height adjustable U post support - 91 mm matt black - Gezu Impex
Height adjustable U post support - 101 mm galvanised silver - Gezu Impex
Height adjustable U post support - 101 mm matt black - Gezu Impex
Height adjustable U post support in use - galvanised silver holding a pergola post on a concrete patio - Gezu Impex
Height adjustable U post support in use - four galvanised supports under a carport frame on a driveway - Gezu Impex
Height adjustable U post support - levelling the post with a spanner on the M20 spindle - Gezu Impex
Height adjustable U post support in use - matt black holding a veranda post on composite decking - Gezu Impex
Informacje o produkcie

Regulowana kotwa do słupa U utrzymuje drewniany słup nad ziemią i pozwala go wypoziomować po montażu. Trzpień M20 ustawia gniazdo na wysokości od 80 do 130 mm, a płyta 150 x 150 mm przykręcana jest do betonu, kostki lub tarasu. Dostępna w kolorze ocynkowanym srebrnym i czarnym matowym.

The saddle holds the post between two 4 mm cheeks, each with two 11 mm holes set 25 and 75 mm from the front edge and 30 mm above the saddle floor. An M20 spindle between saddle and base plate sets the height and locks with a nut. The 5 mm base plate takes four bolts.

Use the post support under pergola and carport uprights, decking and terrace frames, garden offices, canopies and veranda posts. It suits any place where a timber post meets concrete, paving or an existing deck and has to stay dry and be levelled.

Mark the four holes through the base plate, drill, and fix with anchor bolts suited to your surface. Turn the spindle to set the seat height between 80 and 130 mm, then tighten the lock nut. Seat the post between the cheeks and bolt through the four cheek holes. Check level before loading.

Tools: drill, spanner, spirit level. Anchor bolts and post bolts are not included.

Dane techniczne

MM CM CALE
Opening Width
71 mm 7.1 cm 2.80 in
Fits Timber Post
70 x 70 mm 7 × 7 cm 2.76 × 2.76 in
Outer Width
79 mm 7.9 cm 3.11 in
Weight
2000 g 2.00 kg 4.41 lb
Adjustable Seat Height
80 - 130 mm 8 – 13 cm 3.15 – 5.12 in
Overall Height
145 - 195 mm 14.5 – 19.5 cm 5.71 – 7.68 in
Adjustment Spindle
M20 M20 M20
Base Plate
150 x 150 mm 15 × 15 cm 5.91 × 5.91 in
Base Plate Thickness
5 mm 0.5 cm 0.20 in
Base Plate Holes
4 holes Ø 11 mm 4 holes Ø 1.1 cm 4 holes Ø 0.43 in
Base Hole Spacing
110 x 110 mm 11 × 11 cm 4.33 × 4.33 in
Saddle Depth
100 mm 10 cm 3.94 in
Saddle Thickness
4 mm 0.4 cm 0.16 in
Cheek Height
60 mm 6 cm 2.36 in
Cheek Holes
4 holes Ø 11 mm 4 holes Ø 1.1 cm 4 holes Ø 0.43 in
Cheek Hole Spacing
25 and 75 mm 2.5 and 7.5 cm 0.98 and 2.95 in
Finish
Galvanised Silver Galvanised Silver Galvanised Silver
Pack Quantity
1 piece 1 piece 1 piece

Kotwa Regulowana do Słupa Drewnianego U 71 / 91 / 101 mm | Podstawa Słupa Przykręcana

SKU: DUMMY-GZ-FB20-071-GAL
132,67 złInc VAT Cena promocyjna

Regulowana podstawa słupa do drewnianych słupów 70, 90 i 100 mm, do pergoli, wiat i ram tarasowych, gdzie słup musi stać nad ziemią.

  • Łatwy montaż
  • Regulacja wysokości 80-130 mm
  • Szybka wysyłka.
Rozmiar: 71 mm
Rozmiar :
Wykończenie: Ocynkowany srebrny
Wykończenie :
Dodaj do listy życzeń Dodaj do porównania
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Powiadom mnie o dostępności

Wpisz swój adres e-mail, aby otrzymać powiadomienie, gdy produkt będzie ponownie dostępny.

Odblokuj większe oszczędności

Rabat naliczany automatycznie przy kasie.
Kup 4+
126,04 zł
Z VAT
Oszczędzasz 5%
Kup 8+
119,40 zł
Z VAT
Oszczędzasz 10%
Kup 12+
112,77 zł
Z VAT
Oszczędzasz 15%
Kup 16+
106,14 zł
Z VAT
Oszczędzasz 20%

Dane techniczne

MM CM CALE
Opening Width
71 mm 7.1 cm 2.80 in
Fits Timber Post
70 x 70 mm 7 × 7 cm 2.76 × 2.76 in
Outer Width
79 mm 7.9 cm 3.11 in
Weight
2000 g 2.00 kg 4.41 lb
Adjustable Seat Height
80 - 130 mm 8 – 13 cm 3.15 – 5.12 in
Overall Height
145 - 195 mm 14.5 – 19.5 cm 5.71 – 7.68 in
Adjustment Spindle
M20 M20 M20
Base Plate
150 x 150 mm 15 × 15 cm 5.91 × 5.91 in
Base Plate Thickness
5 mm 0.5 cm 0.20 in
Base Plate Holes
4 holes Ø 11 mm 4 holes Ø 1.1 cm 4 holes Ø 0.43 in
Base Hole Spacing
110 x 110 mm 11 × 11 cm 4.33 × 4.33 in
Saddle Depth
100 mm 10 cm 3.94 in
Saddle Thickness
4 mm 0.4 cm 0.16 in
Cheek Height
60 mm 6 cm 2.36 in
Cheek Holes
4 holes Ø 11 mm 4 holes Ø 1.1 cm 4 holes Ø 0.43 in
Cheek Hole Spacing
25 and 75 mm 2.5 and 7.5 cm 0.98 and 2.95 in
Finish
Galvanised Silver Galvanised Silver Galvanised Silver
Pack Quantity
1 piece 1 piece 1 piece

Regulowana kotwa do słupa U utrzymuje drewniany słup nad ziemią i pozwala go wypoziomować po montażu. Trzpień M20 ustawia gniazdo na wysokości od 80 do 130 mm, a płyta 150 x 150 mm przykręcana jest do betonu, kostki lub tarasu. Dostępna w kolorze ocynkowanym srebrnym i czarnym matowym.

The saddle holds the post between two 4 mm cheeks, each with two 11 mm holes set 25 and 75 mm from the front edge and 30 mm above the saddle floor. An M20 spindle between saddle and base plate sets the height and locks with a nut. The 5 mm base plate takes four bolts.

Use the post support under pergola and carport uprights, decking and terrace frames, garden offices, canopies and veranda posts. It suits any place where a timber post meets concrete, paving or an existing deck and has to stay dry and be levelled.

Mark the four holes through the base plate, drill, and fix with anchor bolts suited to your surface. Turn the spindle to set the seat height between 80 and 130 mm, then tighten the lock nut. Seat the post between the cheeks and bolt through the four cheek holes. Check level before loading.

Tools: drill, spanner, spirit level. Anchor bolts and post bolts are not included.

Najczęściej zadawane pytania!

Zapoznaj się z najczęściej zadawanymi pytaniami, aby jak najlepiej wykorzystać zakupy.

Masz pytanie?

Masz pytanie?

możesz skontaktować się z nami pod adresem support@gezu-impex.nl

Tak. Oferujemy szybką i niezawodną wysyłkę do większości krajów europejskich. Opcje wysyłki i czas dostawy są wyświetlane podczas realizacji zamówienia.

Aby mieć pewność, że wybierasz właściwy produkt, zapoznaj się ze szczegółowymi opisami i specyfikacjami na każdej stronie produktu, a w razie potrzeby skontaktuj się z naszym zespołem obsługi klienta po indywidualną poradę. Chętnie pomożemy Ci dokonać najlepszego wyboru dla Twojego projektu!

Możesz skontaktować się z nami e-mailem pod adresem support@gezu-impex.nl lub przez nasz formularz kontaktowy. Jesteśmy dostępni od poniedziałku do piątku.

Oferujemy 30-dniowe prawo do zwrotu nieużywanych produktów w oryginalnym opakowaniu. Aby rozpocząć zwrot, skontaktuj się z naszym zespołem obsługi klienta.

Akceptujemy wszystkie główne karty kredytowe (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay oraz przelewy bankowe przy większych zamówieniach.

Masz pytanie?

Masz pytanie?

możesz skontaktować się z nami pod adresem support@gezu-impex.nl

Icon