Informations produit
The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.
- Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
- 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
- Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
- Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
- Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
- Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.
Specifications (per bracket)
| 60 × 60 × 40 mm | 80 × 80 × 50 mm | 100 × 100 × 60 mm | |
|---|---|---|---|
| Leg length | 60 mm | 80 mm | 100 mm |
| Bracket width | 40 mm | 50 mm | 60 mm |
| Material thickness | 3 mm | 3 mm | 3 mm |
| Fixing holes | 8 × 6 mm | 8 × 6 mm | 8 × 6 mm |
| Hole pitch across width | 20 mm | 30 mm | 40 mm |
| Hole pitch along leg | 30 mm | 50 mm | 70 mm |
| Material | Steel | Steel | Steel |
| Pack quantity | 4, 6, 8 or 12 | 4, 6, 8 or 12 | 4, 6, 8 or 12 |
What is in the box
4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.
Where it is used
Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.
Fitting
Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.
Caractéristiques
Où l’utiliser
Comment installer
Détails techniques
Équerre de Fixation Renforcée 90° Acier 3 mm 60 / 80 / 100 mm | Équerre d'Assemblage Bois GeZu AngleFit | Lot de 4 à 12
Le lot d'équerres AngleFit à 90 degrés vous donne 4, 6, 8 ou 12 équerres identiques en une commande, pour fixer chaque angle d'une ossature avec la même taille et la même finition.
- Lots de 4, 6, 8 ou 12
- Acier de 3 mm dans toutes les tailles
- Huit trous de 6 mm, quatre par aile
- Galvanisé argent ou noir mat
Délais de livraison et de transit
Les commandes passées avant 16h00 les jours ouvrables sont expédiées le jour même avec FedEx ou DPD, avec suivi complet. Les délais de transit sont indiqués en jours ouvrables et excluent les week-ends et jours fériés.
| Destination | Délai de transit |
|---|---|
| France | 2–3 jours ouvrables |
| Pays-Bas | 1–2 jours ouvrables |
| Belgique | 1–2 jours ouvrables |
| Italie | 2–4 jours ouvrables |
| Espagne | 2–4 jours ouvrables |
| Royaume-Uni | 2–4 jours ouvrables |
Voir tous les pays
| Suède | 2–4 jours ouvrables |
| Pologne | 2–4 jours ouvrables |
| Portugal | 2–4 jours ouvrables |
| Irlande | 2–4 jours ouvrables |
| Luxembourg | 1–2 jours ouvrables |
Vous recevez un lien de suivi par e-mail dès que votre commande quitte notre entrepôt. Les articles lourds ou volumineux peuvent être expédiés sur palette — tout supplément éventuel sera clairement indiqué lors du paiement avant que vous ne payiez.
Retours & remboursements
30 jours pour changer d’avis Selon le droit de l’UE, vous pouvez annuler dans un délai de 14 jours — nous vous accordons 30 jours complets à compter de la livraison. Des frais de retour fixes de 9 € s’appliquent, identiques pour tous les pays.
- Les articles doivent être inutilisés, non installés et dans leur emballage d’origine.
- Si vous effectuez un retour en raison d’un mauvais choix de votre part, les frais de retour de 9 € seront déduits de votre remboursement.
- Si un produit est endommagé en raison d’une mauvaise utilisation ou d’un montage incorrect, le remboursement peut être réduit ou refusé.
- Les frais de retour de 9 € ne s’appliquent pas aux envois sur palette. Veuillez contacter le service client pour les retours d’envois sur palette.
Les remboursements sont traités dans un délai de 3 à 5 jours ouvrables après réception du retour.
Récupération de TVA pour entreprises
Entreprise en dehors des Pays-Bas ? Saisissez votre numéro de TVA dans le panier pour acheter hors taxes une fois qu’il a été vérifié.
Réservé aux clients professionnels. La TVA est remboursée uniquement après vérification de la validité de votre numéro de TVA et de son enregistrement hors des Pays-Bas.
Débloquez encore plus d’économies
Réduction appliquée automatiquement lors du paiement.Détails techniques
Informations produit
The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.
- Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
- 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
- Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
- Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
- Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
- Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.
Specifications (per bracket)
| 60 × 60 × 40 mm | 80 × 80 × 50 mm | 100 × 100 × 60 mm | |
|---|---|---|---|
| Leg length | 60 mm | 80 mm | 100 mm |
| Bracket width | 40 mm | 50 mm | 60 mm |
| Material thickness | 3 mm | 3 mm | 3 mm |
| Fixing holes | 8 × 6 mm | 8 × 6 mm | 8 × 6 mm |
| Hole pitch across width | 20 mm | 30 mm | 40 mm |
| Hole pitch along leg | 30 mm | 50 mm | 70 mm |
| Material | Steel | Steel | Steel |
| Pack quantity | 4, 6, 8 or 12 | 4, 6, 8 or 12 | 4, 6, 8 or 12 |
What is in the box
4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.
Where it is used
Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.
Fitting
Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.
Caractéristiques
Où l’utiliser
Comment installer
Questions fréquemment posées !
Découvrez les questions les plus fréquemment posées pour profiter de la meilleure expérience possible.
Une question ?
Vous pouvez nous contacter à support@gezu-impex.nl
Oui. Nous proposons une livraison rapide et fiable dans la plupart des pays européens. Les options de livraison et les délais sont indiqués lors du passage en caisse.
Pour vous assurer de choisir le bon produit, consultez les descriptions détaillées et les spécifications sur chaque page produit, et n’hésitez pas à contacter notre service client pour des conseils personnalisés. Nous sommes là pour vous aider à faire le meilleur choix pour vos projets !
Vous pouvez nous contacter par e-mail à support@gezu-impex.nl ou via notre formulaire de contact. Nous sommes disponibles du lundi au vendredi.
Nous proposons une politique de retour de 30 jours pour les articles inutilisés dans leur emballage d’origine. Veuillez contacter notre service client pour initier un retour.
Nous acceptons toutes les principales cartes de crédit (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay ainsi que les virements bancaires pour les commandes importantes.
Une question ?
Vous pouvez nous contacter à support@gezu-impex.nl










































































































