Etu Claude Bundle need to Exclude on GMC Kulmarauta 90° Teräs 60 / 80 / 100 mm | Kulmalevy ja Kulmakiinnike GeZu AngleFit | Sarja 4-12 kpl
GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions

Lähetetään 24 tunnin kuluessa

Suosittu Viimeisen 24 tunnin aikana myyty 10+ tuotetta

GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions
Tuotetiedot

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Tekniset tiedot

MM CM tuumaa
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

Kulmarauta 90° Teräs 60 / 80 / 100 mm | Kulmalevy ja Kulmakiinnike GeZu AngleFit | Sarja 4-12 kpl

SKU: DUMMY-GZ-AF-060-GAL-4
£16.56Inc VAT Alennushinta

AngleFit 90 asteen kulmarautasarjassa saat 4, 6, 8 tai 12 samanlaista kulmarautaa yhdellä tilauksella, joten rungon jokainen kulma kiinnitetään samalla koolla ja pintakäsittelyllä.

  • Sarjat 4, 6, 8 tai 12 kpl
  • 3 mm terästä kaikissa koissa
  • Kahdeksan 6 mm reikää, neljä kummassakin siivessä
  • Sinkitty hopea tai mattamusta
Pakkauskoko: 4 kpl:n sarja
Pakkauskoko :
Koko: 60 × 60 × 40 mm
Koko :
Pintakäsittely: Sinkitty hopea
Pintakäsittely :
Toivelistaan Vertailuun
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Ilmoita minulle, kun tuotetta on taas varastossa

Syötä sähköpostiosoitteesi, niin saat ilmoituksen, kun tuotetta on jälleen saatavilla.

Säästä enemmän

Alennus lisätään automaattisesti kassalla.
Osta 4+
£15.73
Sis. ALV
Säästä 5%
Osta 8+
£14.90
Sis. ALV
Säästä 10%
Osta 12+
£14.08
Sis. ALV
Säästä 15%
Osta 16+
£13.25
Sis. ALV
Säästä 20%

Tekniset tiedot

MM CM tuumaa
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Usein kysytyt kysymykset!

Tutustu usein kysyttyihin kysymyksiin saadaksesi parhaan mahdollisen kokemuksen.

Onko sinulla kysyttävää?

Onko sinulla kysyttävää?

Voit ottaa meihin yhteyttä osoitteessa support@gezu-impex.nl

Kyllä. Tarjoamme nopean ja luotettavan toimituksen useimpiin Euroopan maihin. Toimitusvaihtoehdot ja toimitusajat näytetään kassalla.

Varmistaaksesi, että valitset oikean tuotteen, tutustu kunkin tuotesivun yksityiskohtaisiin kuvauksiin ja teknisiin tietoihin. Voit myös ottaa yhteyttä asiakaspalveluumme saadaksesi henkilökohtaista neuvontaa. Autamme sinua mielellämme valitsemaan projektiisi parhaiten sopivan tuotteen!

Voit ottaa meihin yhteyttä sähköpostitse osoitteessa support@gezu-impex.nl tai yhteydenottolomakkeemme kautta. Olemme tavoitettavissa maanantaista perjantaihin.

Tarjoamme 30 päivän palautusoikeuden käyttämättömille tuotteille, jotka ovat alkuperäispakkauksissaan. Ota yhteyttä asiakaspalveluumme aloittaaksesi palautuksen.

Hyväksymme kaikki yleisimmät luottokortit (Visa, MasterCard, American Express), PayPalin, Apple Payn, Google Payn sekä pankkisiirrot suurempia tilauksia varten.

Onko sinulla kysyttävää?

Onko sinulla kysyttävää?

Voit ottaa meihin yhteyttä osoitteessa support@gezu-impex.nl

Icon