Home All Products GeZu WallStore J-Hook 100 / 150 / 200 mm | Wall Mounted Storage Hook
WS-100-GAL-MAIN GeZu WallStore J hook 100 mm projection galvanised silver
GeZu WallStore J hook 100 mm projection galvanised silver dimensions

GARAGE TIDY

Ships within 24hrs

In demand Sold 10+ product in last 24hr

WS-100-GAL-MAIN GeZu WallStore J hook 100 mm projection galvanised silver
GeZu WallStore J hook 100 mm projection galvanised silver dimensions
Product Information

The GeZu WallStore J-hook takes hose, cable, ladders and extension leads off the garage floor and puts them on the wall. A solid 10 mm steel rod on a 3 mm backplate, with an upturned tip so what you hang stays hung.

  • Solid 10 mm rod rather than bent sheet, welded to a 120 x 30 x 3 mm backplate that spreads load across both fixings.
  • 40 mm upturn with a 20 mm black cap. A coiled hose or cable does not slide off, and the tip does not mark the wall.
  • Two 6 mm screw holes at 90 mm centres for stud and masonry fixings.
  • Three projections. 100, 150 and 200 mm from the wall face, in galvanised silver or matt black.

Specifications

100 mm 150 mm 200 mm
Projection from wall face 100 mm 150 mm 200 mm
Overall depth from rear of plate 103 mm 153 mm 203 mm
Backplate 120 x 30 x 3 mm
Rod diameter 10 mm
Rod centre above plate bottom 35 mm
Tip rise 40 mm
Tip cap length 20 mm
Mounting holes 2 x 6 mm at 90 mm centres
Material Steel with black tip cap

What is in the box

1 J-hook. Screws and wall plugs are not included. The hook takes two fixings.

Where it is used

Garage and workshop walls, garden sheds for hose and cable, utility rooms, bike and ladder storage, and tidying extension leads off the floor. Pick the projection to match the bulk of what you are hanging.

Fitting

Hold the backplate flat against the wall, mark both holes, then drill and plug to suit your wall type. Use both fixings every time. Projection is measured from the wall face, so allow for it when spacing a row of hooks.

Solid 10 mm rod rather than bent sheet, welded to a 120 x 30 x 3 mm backplate that spreads load across both fixings. The rod rises 40 mm at the tip and carries a 20 mm black cap, so a coiled hose or cable does not slide off and the end does not mark the wall.

Garage and workshop walls, garden sheds for hose and cable, utility rooms, bike and ladder storage, and tidying extension leads off the floor. Pick the projection to match the bulk of what you are hanging.

Hold the backplate flat against the wall, mark both holes, then drill and plug to suit your wall type. Use both fixings every time. Projection is measured from the wall face, so allow for it when spacing a row of hooks.

Technical Details

MM CM IN
Projection From Wall Face
100 mm 10 cm 3.94 in
Overall Depth From Rear Of Plate
103 mm 10.3 cm 4.06 in
Backplate
120 x 30 x 3 mm 12 x 3 x 0.3 cm 4.72 x 1.18 x 0.12 in
Plate Thickness
3 mm 0.3 cm 0.12 in
Rod Diameter
10 mm 1 cm 0.39 in
Rod Centre Above Plate Bottom
35 mm 3.5 cm 1.38 in
Tip Rise
40 mm 4 cm 1.57 in
Tip Cap Length
20 mm 2 cm 0.79 in
Hole Diameter
6 mm 0.6 cm 0.24 in
Mounting Holes
2 x 6 mm at 90 mm centres
Weight
2500 g 2.50 kg 5.51 lb
Material
Steel with black tip cap
Finish
Galvanised silver
Pack Quantity
1

GeZu WallStore J-Hook 100 / 150 / 200 mm | Wall Mounted Storage Hook

SKU: DUMMY-GZ-WS-100-GAL
Sale price 84,59 kr

The WallStore J-hook takes hose, cable, ladders and extension leads off the garage floor and puts them on the wall. A 10 mm steel rod on a 3 mm backplate, with an upturned tip so what you hang stays hung.

  • Three projections: 100, 150 and 200 mm
  • 40 mm upturn with a black protective cap
  • Two 6 mm screw holes at 90 mm centres
Size: 100 mm projection
Size :
Finish: Galvanised Silver
Finish :
Add to Wishlist Add to Compare
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Notify me if back in stock

Enter your email address to be notified if the product becomes available again.

Unlock Bigger Savings

Discount automatically applied at checkout.
Buy 4+
80,36 kr
Incl. VAT
Save 5%
Buy 8+
76,13 kr
Incl. VAT
Save 10%
Buy 12+
71,90 kr
Incl. VAT
Save 15%
Buy 16+
67,67 kr
Incl. VAT
Save 20%

Technical Details

MM CM IN
Projection From Wall Face
100 mm 10 cm 3.94 in
Overall Depth From Rear Of Plate
103 mm 10.3 cm 4.06 in
Backplate
120 x 30 x 3 mm 12 x 3 x 0.3 cm 4.72 x 1.18 x 0.12 in
Plate Thickness
3 mm 0.3 cm 0.12 in
Rod Diameter
10 mm 1 cm 0.39 in
Rod Centre Above Plate Bottom
35 mm 3.5 cm 1.38 in
Tip Rise
40 mm 4 cm 1.57 in
Tip Cap Length
20 mm 2 cm 0.79 in
Hole Diameter
6 mm 0.6 cm 0.24 in
Mounting Holes
2 x 6 mm at 90 mm centres
Weight
2500 g 2.50 kg 5.51 lb
Material
Steel with black tip cap
Finish
Galvanised silver
Pack Quantity
1

The GeZu WallStore J-hook takes hose, cable, ladders and extension leads off the garage floor and puts them on the wall. A solid 10 mm steel rod on a 3 mm backplate, with an upturned tip so what you hang stays hung.

  • Solid 10 mm rod rather than bent sheet, welded to a 120 x 30 x 3 mm backplate that spreads load across both fixings.
  • 40 mm upturn with a 20 mm black cap. A coiled hose or cable does not slide off, and the tip does not mark the wall.
  • Two 6 mm screw holes at 90 mm centres for stud and masonry fixings.
  • Three projections. 100, 150 and 200 mm from the wall face, in galvanised silver or matt black.

Specifications

100 mm 150 mm 200 mm
Projection from wall face 100 mm 150 mm 200 mm
Overall depth from rear of plate 103 mm 153 mm 203 mm
Backplate 120 x 30 x 3 mm
Rod diameter 10 mm
Rod centre above plate bottom 35 mm
Tip rise 40 mm
Tip cap length 20 mm
Mounting holes 2 x 6 mm at 90 mm centres
Material Steel with black tip cap

What is in the box

1 J-hook. Screws and wall plugs are not included. The hook takes two fixings.

Where it is used

Garage and workshop walls, garden sheds for hose and cable, utility rooms, bike and ladder storage, and tidying extension leads off the floor. Pick the projection to match the bulk of what you are hanging.

Fitting

Hold the backplate flat against the wall, mark both holes, then drill and plug to suit your wall type. Use both fixings every time. Projection is measured from the wall face, so allow for it when spacing a row of hooks.

Solid 10 mm rod rather than bent sheet, welded to a 120 x 30 x 3 mm backplate that spreads load across both fixings. The rod rises 40 mm at the tip and carries a 20 mm black cap, so a coiled hose or cable does not slide off and the end does not mark the wall.

Garage and workshop walls, garden sheds for hose and cable, utility rooms, bike and ladder storage, and tidying extension leads off the floor. Pick the projection to match the bulk of what you are hanging.

Hold the backplate flat against the wall, mark both holes, then drill and plug to suit your wall type. Use both fixings every time. Projection is measured from the wall face, so allow for it when spacing a row of hooks.

Frequently asked questions!

Explore the most frequently asked questions to help you get the best experience.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Yes. We offer fast, reliable shipping across most European countries. Shipping options and delivery times are shown during checkout.

To ensure you're choosing the right product, review the detailed descriptions and specifications on each product page, and feel free to reach out to our customer support team for personalized guidance. We're here to help you make the best choice for your project needs!

You can reach us via email at support@gezu-impex.nl, through our contact form. We're available from Mon-Fri.

We offer a 30-day return policy for unused items in their original packaging. Please contact our customer service team to initiate a return.

We accept all major credit cards (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay, and bank transfers for larger orders.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Icon