Home All Products GeZu BoltBase U-Post Shoe 71 / 91 / 101 mm | Bolt Down Timber Post Holder
BB-071-GAL-MAIN GeZu BoltBase U post shoe 71 mm galvanised silver
GeZu BoltBase U post shoe 71 mm galvanised silver dimensions

BUILT TO LAST

Ships within 24hrs

In demand Sold 10+ product in last 24hr

BB-071-GAL-MAIN GeZu BoltBase U post shoe 71 mm galvanised silver
GeZu BoltBase U post shoe 71 mm galvanised silver dimensions
Product Information

The GeZu BoltBase holds a timber post off the ground on an existing concrete, paved or decked surface. There is no spindle and nothing to adjust: the post drops into the cradle, you bolt through, and it stays put.

  • 4 mm steel cheeks on a 5 mm base plate. The base is the part that takes the anchor load, so it is the thickest section.
  • 150 x 150 mm base with four 11 mm holes on 120 x 120 mm centres, 15 mm in from each edge. Suits standard M10 concrete anchors.
  • Two 11 mm through holes in each cheek, 70 mm apart vertically, so the post is bolted rather than only screwed.
  • Three openings. 71, 91 and 101 mm, for nominal 70, 90 and 100 mm timber.
  • Open front and rear. Water drains instead of collecting around the post end, and you can see the seating when you fit it.

Specifications

  71 mm 91 mm 101 mm
Clear opening 71 mm 91 mm 101 mm
Fits timber post 70 x 70 mm 90 x 90 mm 100 x 100 mm
Outside cheek width 79 mm 99 mm 109 mm
Base plate 150 x 150 x 5 mm
Cheek height above base 150 mm
Cheek depth 100 mm
Cheek thickness 4 mm
Overall height 155 mm
Base fixing holes 4 x 11 mm on 120 x 120 mm centres
Cheek fixing holes 2 x 11 mm per cheek, 70 mm vertical pitch
Material Steel

What is in the box

1 fixed U-post shoe. Timber, fixing bolts, screws and concrete anchors are not included.

Where it is used

Fence and gate posts on concrete, carport and pergola legs on a slab, decking balustrade posts, garden structures on paving, and any post that would otherwise sit in wet ground.

Fitting

Stand the shoe where the post goes and mark the four base holes. Drill for your anchors, bolt the base down, then seat the post and bolt through both cheeks. The shoe lifts the post end clear of standing water, which is the point of using one.

The base plate is the part that takes the anchor load, so it is the thickest section at 5 mm, with the cheeks at 4 mm. Each cheek carries two 11 mm through holes 70 mm apart, so the post is bolted rather than only screwed. Front and rear stay open, which lets water drain instead of collecting around the post end.

Use the BoltBase for fence and gate posts on concrete, carport and pergola legs on a slab, decking balustrade posts, garden structures on paving, and any post that would otherwise sit in wet ground. Three openings cover nominal 70, 90 and 100 mm timber.

Stand the shoe where the post goes and mark the four base holes. Drill for your anchors and bolt the base down, then seat the post and bolt through both cheeks. The shoe lifts the post end clear of standing water, which is the point of using one, so do not pack the opening with mortar.

Technical Details

MM CM IN
Clear Opening
71 mm 7.1 cm 2.80 in
Fits Timber Post
70 x 70 mm 7 x 7 cm 2.76 x 2.76 in
Outside Cheek Width
79 mm 7.9 cm 3.11 in
Base Plate
150 x 150 x 5 mm 15 x 15 x 0.5 cm 5.91 x 5.91 x 0.20 in
Cheek Height Above Base
150 mm 15 cm 5.91 in
Cheek Depth
100 mm 10 cm 3.94 in
Cheek Thickness
4 mm 0.4 cm 0.16 in
Overall Height
155 mm 15.5 cm 6.10 in
Hole Diameter
11 mm 1.1 cm 0.43 in
Base Fixing Holes
4 x 11 mm on 120 x 120 mm centres
Cheek Fixing Holes
2 x 11 mm per cheek 70 mm vertical pitch
Weight
2500 g 2.50 kg 5.51 lb
Material
Steel
Finish
Galvanised silver
Pack Quantity
1

GeZu BoltBase U-Post Shoe 71 / 91 / 101 mm | Bolt Down Timber Post Holder

SKU: DUMMY-GZ-BB-071-GAL
82,85 złInc VAT Sale price

The BoltBase holds a timber post off the ground on an existing concrete, paved or decked surface. No spindle and nothing to adjust: the post drops into the cradle, you bolt through, and it stays put.

  • 4 mm steel cheeks on a 5 mm base plate
  • Four 11 mm anchor holes on 120 mm centres
  • Open front and rear so water drains
Size: 71 mm
Size :
Finish: Galvanised Silver
Finish :
Add to Wishlist Add to Compare
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Notify me if back in stock

Enter your email address to be notified if the product becomes available again.

Unlock Bigger Savings

Discount automatically applied at checkout.
Buy 4+
78,71 zł
Incl. VAT
Save 5%
Buy 8+
74,57 zł
Incl. VAT
Save 10%
Buy 12+
70,42 zł
Incl. VAT
Save 15%
Buy 16+
66,28 zł
Incl. VAT
Save 20%

Technical Details

MM CM IN
Clear Opening
71 mm 7.1 cm 2.80 in
Fits Timber Post
70 x 70 mm 7 x 7 cm 2.76 x 2.76 in
Outside Cheek Width
79 mm 7.9 cm 3.11 in
Base Plate
150 x 150 x 5 mm 15 x 15 x 0.5 cm 5.91 x 5.91 x 0.20 in
Cheek Height Above Base
150 mm 15 cm 5.91 in
Cheek Depth
100 mm 10 cm 3.94 in
Cheek Thickness
4 mm 0.4 cm 0.16 in
Overall Height
155 mm 15.5 cm 6.10 in
Hole Diameter
11 mm 1.1 cm 0.43 in
Base Fixing Holes
4 x 11 mm on 120 x 120 mm centres
Cheek Fixing Holes
2 x 11 mm per cheek 70 mm vertical pitch
Weight
2500 g 2.50 kg 5.51 lb
Material
Steel
Finish
Galvanised silver
Pack Quantity
1

The GeZu BoltBase holds a timber post off the ground on an existing concrete, paved or decked surface. There is no spindle and nothing to adjust: the post drops into the cradle, you bolt through, and it stays put.

  • 4 mm steel cheeks on a 5 mm base plate. The base is the part that takes the anchor load, so it is the thickest section.
  • 150 x 150 mm base with four 11 mm holes on 120 x 120 mm centres, 15 mm in from each edge. Suits standard M10 concrete anchors.
  • Two 11 mm through holes in each cheek, 70 mm apart vertically, so the post is bolted rather than only screwed.
  • Three openings. 71, 91 and 101 mm, for nominal 70, 90 and 100 mm timber.
  • Open front and rear. Water drains instead of collecting around the post end, and you can see the seating when you fit it.

Specifications

  71 mm 91 mm 101 mm
Clear opening 71 mm 91 mm 101 mm
Fits timber post 70 x 70 mm 90 x 90 mm 100 x 100 mm
Outside cheek width 79 mm 99 mm 109 mm
Base plate 150 x 150 x 5 mm
Cheek height above base 150 mm
Cheek depth 100 mm
Cheek thickness 4 mm
Overall height 155 mm
Base fixing holes 4 x 11 mm on 120 x 120 mm centres
Cheek fixing holes 2 x 11 mm per cheek, 70 mm vertical pitch
Material Steel

What is in the box

1 fixed U-post shoe. Timber, fixing bolts, screws and concrete anchors are not included.

Where it is used

Fence and gate posts on concrete, carport and pergola legs on a slab, decking balustrade posts, garden structures on paving, and any post that would otherwise sit in wet ground.

Fitting

Stand the shoe where the post goes and mark the four base holes. Drill for your anchors, bolt the base down, then seat the post and bolt through both cheeks. The shoe lifts the post end clear of standing water, which is the point of using one.

The base plate is the part that takes the anchor load, so it is the thickest section at 5 mm, with the cheeks at 4 mm. Each cheek carries two 11 mm through holes 70 mm apart, so the post is bolted rather than only screwed. Front and rear stay open, which lets water drain instead of collecting around the post end.

Use the BoltBase for fence and gate posts on concrete, carport and pergola legs on a slab, decking balustrade posts, garden structures on paving, and any post that would otherwise sit in wet ground. Three openings cover nominal 70, 90 and 100 mm timber.

Stand the shoe where the post goes and mark the four base holes. Drill for your anchors and bolt the base down, then seat the post and bolt through both cheeks. The shoe lifts the post end clear of standing water, which is the point of using one, so do not pack the opening with mortar.

Frequently asked questions!

Explore the most frequently asked questions to help you get the best experience.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Yes. We offer fast, reliable shipping across most European countries. Shipping options and delivery times are shown during checkout.

To ensure you're choosing the right product, review the detailed descriptions and specifications on each product page, and feel free to reach out to our customer support team for personalized guidance. We're here to help you make the best choice for your project needs!

You can reach us via email at support@gezu-impex.nl, through our contact form. We're available from Mon-Fri.

We offer a 30-day return policy for unused items in their original packaging. Please contact our customer service team to initiate a return.

We accept all major credit cards (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay, and bank transfers for larger orders.

Is there any question?

Is there any question?

you can contact us on support@gezu-impex.nl

Icon