Most wood connectors are sized for common timber sections from 45 mm up to 100 mm and beyond, with the bracket seat or hanger throat matching widths such as 45×45, 70×70 and 90×90 mm. Check the internal dimension of the connector against your beam or post width so the timber sits flush. Adjustable and multi-size models cover a wider range.

Galvanised steel wood connectors are suitable for outdoor use in decks, fences and pergolas, because the zinc coating resists corrosion in damp conditions. For permanent exposure or ground contact, choose hot-dip galvanised or stainless steel versions for a longer service life. Indoor structural joints can use standard galvanised or bright steel.

Fix wood connectors with the fastener they are designed for: use connector nails or dedicated structural screws driven through every pre-punched hole for the full rated strength. Short, thick connector nails and hex- or torx-head structural screws give the best hold, while ordinary wood screws are not a substitute where load matters. Fill all the holes rather than a few for maximum capacity.

The main types are angle brackets, joist hangers and beam shoes, flat and mending plates, purlin and rafter anchors, and pergola post connectors. GeZu Impex stocks these in galvanised steel across a range of sizes for decking, roofing, fencing and pergola projects. Fixings are sometimes supplied separately, so check each product's specification.